Step 1

The first step is to buy a ½” female 100 psi water pressure gauge from Home Depot or your local hardware store.

Step 2

Make sure all of your household faucets are turned off then remove your showerhead. You can remove the showerhead by unscrewing the head from the pipe using a your hands or by using a crescent wrench.

Step 3

Screw on the gauge to the pipe protruding out of the wall and make sure its sealed tight. Once everything is ready to go, turn on both faucets as far as they go.

Step 4

Check the gauge to see what the pressure reading is. Write down the psi number, turn everything off and put your showerhead back together.

Step 5

Come back to our store and let us know what psi reading you got and we’ll make sure you get the most accurate output from your showerhead!